Fenix WF25RM with Dock 3000lm + UV

Solid power, sturdy build, incredible maximum output, and a handy charging dock – the WF25RM UV is ready for duty. The battery capacity is also impressive: 5000 mAh.

The maximum beam distance reaches nearly 400 meters. With the UV light, you can detect material defects in welds, painted surfaces, and other objects. At the rear of the flashlight, there’s a generously sized spring hook, allowing it to be hung from, for example, a belt loop.

The flashlight turns on by holding down the power switch for half a second. After that, the four brightness modes can be cycled through with short presses, and the UV mode is activated with a double click. To access the highest output “burst mode,” hold the switch while the light is off until it turns on (1.2 seconds).

• Aluminum body (type A6061-T6), hard-anodized finish
• AR-coated, anti-reflective glass lens
• UV output: 500 mW, wavelength 365 nm
• Charging dock can be mounted on a wall, desk, or vehicle
• Dock grips the flashlight via a magnet
• The flashlight can also be charged directly via USB-C port
• Charging time: approx. 2.5 hours
• Remaining charge indicator and low-voltage warning
• Optional safety feature reduces the output from burst or full power if the light is less than 1 cm from a surface – this function can even prevent fire hazards
• IP68 protection rating

What’s in the box: WF25RM flashlight, ARB-L21-5000U battery, charging dock, USB magnetic charging cable, spare O-ring seal, user manual.

All Fenix flashlights are tested in-house according to the American ANSI/FL1 standard. The WF25RM comes with a five (5) year Fenix warranty (battery 1 year).